...
Product use - Shows all product use associated with this type of equipment
Create a new type
Examples of equipment types could be the following:
Category: Pumps
- Pump XF200
- Pump XF300
- Pump XJ200
- etc.
Category: Crane
- Cranety 2500
- BFC 5000
- etc.
But why are the types divided into these e.g. "models"? The answer, in this case, is that these types of equipment has different service intervals.
Maybe the Pump XF200 needs service every 2 years, but the Pump XF300 needs service once a year. This is specified on the equipment type and therefore we need to divide it like this.
Create a new type
To create a new equipment type you'll need to access the equipment module's SETTINGS > TYPES, followed by pressing the 'New equipment type'-button.
Here, you need to fill out the following:
- Category: Choose a category where this type of equipment belongs. See above for info about equipment categories
- Type name: Give the new equipment type a name
- Code: This usually works as "initials" for the equipment type. You can enter 3-4 letters. Each equipment which is later added to the type will get a code consisting of the 3-letter code plus a 4-digit number, for instance 'SNO0008'
- Picture: You can upload a picture of the specific type of equipment to make it more recognisable. If the picture is larger than 250x250 pixels, then it will be scaled down to this
- Period type: The period type is only relevant if you need to perform Service on this specific equipment type. This specifies how often equipment of this type should be serviced. You will then be warned, via the normal warning-system (See Equipment Settings for warning system) before a piece of equipment needs service. If you don't need this simply select 'No period'
- Product no.: Here you can select a product number. This will generate a product use for the amount of time the equipment has been taken by a user, that is also checked in on a task
- Sub type: Here you can select a subtype
- Allow parts: If this is marked you'll be able to select other pieces of equipment as spare part for these types of equipment
- Allow registrations: If this is marked you'll be able to select that time registered on e.g. a task, should also be registered on the equipment attached to the task
- Reserve in prod.plan: If this is marked it enables the user to reserve this type of equipment in the production plan
Examples of equipment types could be the following:
Category: Pumps
- Pump XF200
- Pump XF300
- Pump XJ200
- etc.
Category: Crane
- Cranety 2500
- BFC 5000
- etc.
But why are the types divided into these e.g. "models"? The answer, in this case, is that these types of equipment has different service intervals. Maybe the equipment Pump XF200 needs service every 2 years, but another equipment, Pump XF300, needs service once a year. This is specified on the equipment type and therefore we need to divide it like this.
Edit an equipment type
Editing an equipment type happens in the same menu. Just click on the pencil or directly on the title to enter edit mode.
Here you'll have to enter some details (similar to when creating equipment types) about this specific type of equipment.
When the relevant information has been entered, simply click the "Save"-button and now you're ready to create equipment of this type for you to be working on.
...